The aluminum tile trim is made by extruding pure aluminum with alloy elements such as manganese and magnesium. It has the characteristics of light weight, corrosion resistance, wear resistance, etc., and its surface has a bright metallic luster after anodizing and coloring treatment, that is, it is resistant to light and weather, but pay special attention to these 5 matters during construction:
1. Inspection and confirmation before construction
Before the construction of the aluminum alloy edge trim, check its surface for scratches, deformation, etc., and confirm whether the color, size, and specifications of the edge trim match the site requirements, and start the construction after confirming that it is correct.
2. Prevent corrosion of acid and alkali substances
Nowadays, there are many tile glues and grouts on the market that contain relatively high alkaline substances. After mixing with water, these tile glues and grouts will adhere to the surface of the edge trim, which will cause corrosion to the electroplating layer. After a long time of chemical reaction, the electroplating layer on the surface of the edge trim will slowly appear crystalline material, which cannot be cleaned. The post-remediation can only be polished and re-sprayed on the surface. In serious cases, the edge trim can only be removed and re-applied. Installation increases the construction cost and delays the construction period.
3. Remove the film after construction
Imported brand edge trim products have film packaging on the surface. This film can be removed after construction. This not only protects the electroplating layer from scratches, but also prevents corrosion by corrosives and reduces the probability of oxidation.
4. Avoid using alkaline cleaning products during maintenance
During construction, if there are stains remaining on the surface of the material, it should be cleaned with clean water in time. In the later cleaning and maintenance process, pay special attention to not using strong alkaline cleaning products such as decontamination powder, which will damage the electroplated layer on the surface of the edge trim.
5. The choice of ground edge trim
Aluminum alloy edge trims are mostly used on walls. When used on the ground, try to choose the original color of aluminum to prevent hard objects from scratching the electroplated layer.