To attach wall tiles, the traditional method in the past was to use broken tiles, put them at the bottom of the wall tiles and support them with the ground, or use small wooden sticks on the junction of the bottom of the tiles and the ground, and then put them up to fix it. effect. But these two methods are relatively backward, because it is easy to fall off and unstable in use.
Now it is recommended to use the tile top height device, as long as the heights of the wall tiles and the ground are adjusted, the angle can also be adjusted during the process, and the ceiling device can be placed inside to support it, which is very stable. If the porcelain block is found to be displaced or defective in the middle, it can be adjusted and repaired at any time. This kind of treatment can make the tiles stabilized in the later stage to achieve a neat and beautiful effect.
Of course, no matter in which functional area the tiles are installed, there is a fixed order, they are all pasted on the wall first, and then on the ground, which can improve work efficiency and avoid troubles such as damage to the tiles when the ground tiles are pasted first. It should be noted that if it is installed in functional areas such as bathrooms and kitchens, waterproof measures should be taken in these places with a lot of water.