The fineness of decorative copper strips depends largely on the fineness and proportion of copper materials.
May 23, 2021
Chamfering means that when laying tiles, the corners of two bricks are ground to 45 degrees at the external corners, and then the two bricks are "merged" together to form a 90-deg
May 22, 2021
Why is the suction cup on the tile easy to fall off? Mainly because of air leakage on the disk. Suction cup products should be used on a smooth and flat hard surface. Tiles and mar
Aug 28, 2021
Stainless steel series: steel resistant to corrosion by weak corrosive media such as air, steam, and water, and chemical corrosive media such as acid, alkali, and salt.
May 20, 2021
The main alloying elements are copper, silicon, magnesium, zinc, and manganese, and the secondary alloying elements are nickel, iron, titanium, chromium, lithium and so on.
May 19, 2021
(PVC material is a kind of plastic decoration material, it is the abbreviation of polyvinyl chloride material, PV (Polyvinyl Chloride, PVC for short).
May 18, 2021
Check the verticality of the wall corner and the flatness of the wall first, and find that the error is too large, so the protrusions, unevenness and depression should be removed.
May 17, 2021
Change the traditional cumbersome construction process, reduce labor intensity, increase efficiency by 3-5 times, shorten construction time, and reduce engineering costs.
May 16, 2021
Scratching the big white sun corner line is a new type of building material specially designed for the difficult construction of wall corners, door side strips and window corners.
May 15, 2021
Use three nails to fix the corner line at the installation place so that the tile corner line is parallel to the wall.
May 14, 2021
When using corners, ceramic tiles or stones do not need corners, chamfering, the master who can paste tiles and stones only needs three nails to complete the installation.
May 13, 2021
The workload of the tile angle grinding operation is large, and the technical requirements for the workers are high.
May 12, 2021
