How to use the tile leveling system to lay tiles?
When laying tiles, it is necessary to use tile leveling system around the tiles to be stuck. Generally, one tile is equipped with four tile leveling system.
In this way, the flatness of the tiles can be greatly improved, and the gap between the tiles can be ensured at the same time. It can also effectively prevent the hollowing of tiles due to thermal expansion and contraction in the later stage. Do the same for wall tiles and floor tiles.
After the cement has dried for a while, use your foot or a rubber mallet to kick the tile clips away. If some are left in the seam, just shave it off with a knife when making beautiful seams later.
At the same time, the top height device can also be used to lay wall tiles. The top height device lifts the tiles from below, and can adjust the height at will, so that the bottom of the tiles is on the same horizontal line to reduce errors. At the same time, it also leaves room for the paving of floor tiles. This kind of ceiling device can replace the previous method of using wooden strips and pipelines, which improves the efficiency of paving and is very convenient.
