How to install stainless steel skirting? If you don’t understand, please watch the video.
1. Clean the wall foundation: remove the protruding concrete floating blocks at the wall, corner and root of the wall where the skirting line is installed; check the straightness of the wall, the maximum gap should not exceed 3 mm. The protruding part of the wall without edges and corners should be smooth. Wall grooves should be gasketed.
2. Percussion drilling fixation: Fix the drilling mold on the positioning ruler, lean against the wall, and drill the wall with an impact drill; punch a wooden needle or a plastic expander into the hole tube. When fixing the buckle, still use the positioning ruler to adjust the buckle and fix it at the same height (using the round hole on the buckle).
3. Install the skirting line: After ensuring that all the buckles are installed on the same straight line (error ±1mm), cut the skirting line according to the size and chamfer it, so that the height of the skirting line is neat when inserted. At the same time, tear off the protective film on the contact surface of the skirting line with the wall and the ground.
4. Align the skirting line with the buckle and buckle in, and then install the connector and angle plug.