Tools and accessories
Tilling tools （Serrated scraper), tile suction cup, Tile knock board, Tile adhesive, Cleaning tools (soft duster), soft duster
installation sequence
1: Stir the tile adhesive: add the tile adhesive to the appropriate amount of water and stir evenly.
2: Lay the base: On a flat, clean, and moist construction surface, first mark the construction line, apply the prepared adhesive evenly on the construction surface, and then use a serrated scraper to scrape it.
3: Tiling: first use a suction cup to absorb a tile and stick it on, then use a tile knocking board to knock the tile flat and straight.
4: Paste the stainless steel decorative trims: tear off the packaging film of the decorative trim, put the decorative trim into the pre-designed position, press the decorative trim with both hands slightly to make it flush with the tile. Then use the suction cup to paste another tile, so that one decorative trim will be perfectly combined with the two tiles.
5: Cleaning: About 45 minutes after pasting, use a sponge cloth and clean water to gently wipe clean the tile adhesive or caulking agent on the surface of the trims. Be careful not to scratch the stainless steel surface.
