Edge-protection Profile For Same-height, Hard Surface Transitions

Edge-protection profile for same-height, hard surface transitions is designed to provide transitions between existing same-height, hard-surface floor coverings (e.g., ceramic tile or natural stone, parquet flooring, concrete pavers, laminate, etc.), primarily in retrofit applications.

The profile is available in stainless steel, solid brass, and anodized aluminum. which is installed within the existing joint cavity and overlaps adjoining surface materials, thus preventing edges from becoming damaged when subjected to mechanical stress.

Edge protection profiles in brass and anodized aluminum size 9/14, is flexible in the lateral direction and can be used in curved applications.

1. Select the profile according to joint width, to ensure proper support of the lateral crosspiece.

2. The joint cavity must be at least 3/8" (9 mm) deep and free of debris. Substances that inhibit adhesion must be removed from the sides of the joint.

3. Fill the joint with elastomeric sealant or cement. Then insert the vertical leg of profiles in the joint so that the lateral crosspiece rests completely on the edges of the surface coverings.

Remove any excess sealant with a suitable cleaner.

Hot Tags: edge-protection profile for same-height, hard surface transitions, China, suppliers, manufacturers, factory, customized, wholesale, door threshold strips stainless flooring, metal transition strips for wall tile, Metal Transition Strips For Tile, aluminium carpet transition tile trim, stainless steel floor carpet tile edging strip, metal tile to carpet transition strip for floor