Leveling Spacers And Wedges

The plastic tile leveling system can assist the tiler to level quickly and easily, reduce the difficulty of construction, improve the flatness of the tile surface, improve the tile efficiency, and make the tiles fixed quickly to prevent movement, leaving even the gaps, and the tile gaps are consistent, beautiful, and prevent The tiles are hollow and cracked.

Product Description

The correct use of each part of the tile leveling:

1. We need to take out the PVC Base first. Because the plastic base is disposable, it is placed in the middle of two adjacent tiles, and the matching inserts and push pliers are fixed and clamped. When the tile glue on the back of the tile is dry and firmly pasted, you can use a rubber hammer to knock off the upper part of the base. The buckle is disposable (also called a strap). Use the pusher to push the buckle into the buckle and fix the tile. After the tile cement has solidified, tap the buckle with a skin hammer. The buckle will fall off. The bottom support is embedded under the tile, so you don't need to take it out.

2. Just remove the wedge. The wedge is mainly used to fix the base and the tiles, improve the flatness between the tiles, and prevent the tiles from moving. For this reason, the tile is almost stable and can be taken out. After removing the wedge, you can remove the push pliers. When uninstalling the leveler, you must uninstall it slowly, otherwise it will leave a mark, which is difficult to eliminate. And this wedge can be used repeatedly, you can keep it, and you can use it next time you buy the gasket directly.

3.The push pliers are special tools used to fix clamping inserts and gaskets. Using this tool can speed up the construction speed.

Hot Tags: leveling spacers and wedges, China, suppliers, manufacturers, factory, customized, wholesale, tile spacers leveling system, 20mm tile leveling system, tile wedges toolstation, leveling concrete floor for tile, tile self leveling system, wedge tile leveling system